Archive for September, 2009

LCD Vs Plasma HDTV

LCD or plasma HDTV – which is best? When you receive for a flat-screen, slim and sexy, you can watch HDTV, you have the choice between two technologies, LCD and plasma gas.

Each has its advantages and disadvantages and is therefore more appropriate in certain
Circumstances.

Historically, the LCD or plasma HDTV choice was pretty simple. If you wanted a
Flat-screen that was about 40in or bigger, you had to choose plasma, because sometimes you
shouldLCD select. However, as LCD technology improves, are getting LCD HDTV
larger and most large manufacturers expect that the number of LCDs they
produce continuously in the years to continue to increase while the number of plasmas
. reduce However, if you are looking for a flatscreen TV today, plasma still has a lot
to offer.

To understand the LCD vs plasma HDTV question, we need the way the look
to work both technologies.

LCD

LCD HDTV workGoal, set light behind an LCD panel, consisting of a fixed number
of pixels. Each pixel is either red, blue or green and is switched off or if a
Voltage is not applied to become. If the voltage is applied to a pixel, it turns off
which means that no light can shine through them.

The main advantage of LCD or Plasma HDTV LCD panels is that not suffer from
a so-called burn-in. This is a feature of plasma TVs where they are used to see
TV stations with logospermanent display on the screen or where they are used for
Play video games with the static images like a cockpit on the flight have
Simulators. The image literally 'burns-in "screen means that even if the
No image is available, you can still have a faint trace of him on the screen. How to Video
Players, in particular, LCD is a better choice than plasma.

Plasma

Plasma HDTV has more than one million chambers which house, or a combination of
Gases. If aVoltage is ionized with one of these panels apply the gas and
emits UV light. The light strikes red, green or phosphorous plue on the coated
within the chamber and a pixel emits this color light.

Plasma HDTV tend to have better contrast than LCDs because, even if a pixel
eliminated on a LCD display, it is not blocked all the light that is switched through and
so that the pixels are not completely black. Plasma HDTV also tend to have a wider
DisplayAngle than LCDs, as on the LCD HDTV contrast and color of the image can
change when the screen is viewed from different angles.

LCD or plasma HDTV conclusion

The technology is changing fast, but at the moment (July 2004), it is still true that in
40in sizes and above, provides a plasma is less expensive and generally better
Solution. For screen sizes less than 40in LCD is better. However, as LCD technology
improved and prices fall, this willchange.

Electronic Gadgets from the store seem to sprout like mushrooms Nothing. Any time you can see when reading a newspaper or magazine and the television, you introduced with the latest and most advanced technological breakthrough on the face of the earth. Of the many gizmos and devices on the market, one thing that TV addicts could be considered to draw investment to the HDTV or High Definition Television.

This new device is an enhanced version of digital television, or DTV. TheResolution in HDTV is defined, and you really have a cinematic experience with this type of television.

But the purchase of HDTV, you must insist on an integrated system because it is complete and you must not think about connecting tuner or receiver. With the integrated system, you only need a satellite or cable connection.

If you do not have enough money, you can probably consider the HDTV-ready set. This is an HDTVmarket, but you have to find or buy an external receiver, so you look at an HDTV or program. It is important to note that a HDTV without this external receiver is just like an ordinary television. You will not be able to enjoy high definition images, even when the monitor is HDTV without this add-on.

By the way, an HDTV-ready is not necessarily an HDTV capable screen or monitor. Before purchasing this type of system, carefully askYour seller when the crowd is actually an HDTV screen. Better yet, just stick with an integrated HDTV system or the HTV-ready set.

There are many brands of HDTV on the market, choosing one can be really disheartening. To help you with this task, please read the guide below to know my, to seek what features of HDTV to:

Audio

The most common type of sound system with HD television sets will be used with Dolby Digital Surround. However, some manufacturers useother kind of audio systems. The best way to determine which brand has the best sound is to try them.

Connections

The number of lines of HDTV varies tremendously from one brand to another. If you buy an HDTV or other TV sets, you need to see if the product has all the connections you need.

The usual connection ports, which are used are composite video, RF, A / V, RCA, component video, VGA and HDMI.

HDReceivers / Tuners

If you do not want the hype, you should look for a lot of that has an internal HD receiver or tuner. As mentioned earlier, this is the kind of integrated system, HDTV set. However, if you rent a cable or satellite provider offers free, or external HD receiver, you might want to buy the much cheaper HDTV-ready set.

Resolution

One of the key functions that need to look out for when buying an HDTV, the resolution. WhenResolution of the HDTV set is poor, then there's really no reason why you buy this set, because the old television set have a better resolution.

If you want a fantastic resolution, be sure for a lot of that has a vertical resolution of 1080i and 720p look for. TV standard is usually only a vertical resolution of 480i. By the way, is the "i" for interlaced, here, which is used, the type of vertical resolution than analogue television, while the "p" progressive,Selection for digital TVs.

How to Choose a New HDTV

Update For many people, the choice of their new TV in only that they consider when updating their audio / video or home entertainment system. This is a serious error in the verdict which is not really their fault. When they buy their new HDTV, they are not worried about ports, sockets, and cords, but they should. Many things have changed since their previous TV.

There is nothing worse then buying a new HDTV, sat down for the first timeTo see your favorite program, and grunts in disgust at the horrific images. There are two different approaches to this problem. You can choose a HDTV, which fit into your existing system, or you can also buy other components of your entertainment system update at the same time. This is how much you can afford HDTV implications. HDTV offers digital picture and sound quality. If you do not have the sound quality of care or little need for a surround –Sound system, this is one of the components, you can either get rid of, not update, or ignore, and it will save you money. But half of HDTV to enjoy quality, high-definition surround sound. Do you already have your favorite comedy, soap opera or a sporting event in surround sound? It is a great experience that should not be ignored. However, if this component, or it does not matter, do you have the opportunity to save some money and time, but read on to find out whatThey have missed.

Programming … The first component that you need to upgrade your programming is. When you Dish, Direct TV, Comcast, or another provider, you must change the programming on the HD. Currently, some programs can access a specific channel in your programming package will show in HD. You can tell because the screen is cut off at the sides or on the floor. But it needs a new feed / signal processing a high definition signals. Make sure that you give your provider prior noticebecause they need to change the signal to your satellite or set-top box, and they need to change your devices. Take time to research what software packages they have and what new devices and offers are encouraged. If there is one thing to make you change, make sure it's your programming. If you get some of your signals, OTA (Over The Air), you can still do, but you need a new antenna.

Set-Top Box … This is your cable or satellite box, replacedthe signal from your provider. If you have cable, the signal comes directly from the wall if you have satellite, you probably need a new satellite dish to receive outside of the signal. Your current set-top box will still work, but usually a new one, that HD programming will update it in the record may have more advanced features and is compatible with HD signals.

Audio Receivers … If you like, or an audio receiver, now is the time to research them. IfYou want to use your old, make sure that your new HDTV has the correct ports for them. Using the most HDTV's HDMI, both audio and sound are in a line, you may, however, that have used a digital optical or feed, then you must make sure your new HDTV receive these signals and take over ports to them.

DVD or Blu-ray … Depending on the set-top box (broadcast signal) receiver, you can also use a new DVD or purchaseBlu-ray. Once again, sure you have enough ports on both the TV and on the new DVD or Blu-ray not before you buy.

Gaming System … Check your current gaming system and make sure you have the right, and enough ports on your HDTV.

Computer … If you want to connect your computer to the HDTV to examine the capabilities and ports of the two and make sure that HDTV can handle it.

Tips and …Steps

1. Make a map of all components. Often the HDTV or audio receiver manuals have sample ones, as well known, but you must make sure that you have enough ports.

2. Decide whether you want your audio or HDTV receiver to accept most of the signals. If you have an older audio receiver, you must use both, because you have no other choice. But newer receiver should be able to accept most of the signals and the digital information on the Shoot Outother components.

3. Purchase all the cables you need before you buy the device.

4. Purchase of HDTV, audio receivers, DVD / Blu-ray and gaming system upgrades in this order 5th Find a techie to help you, experiment, research, and read the owners manual. Enjoy!

LCD Backlighting For HDTV

LCD is winning the race to be the dominant display technology for HDTV. According to DisplaySearch, in 2007, the market for LCD (liquid crystal diode) TVs was estimated at $ 27.4 billion euros. LCD TV shipments rose more than expected 52% year on year in the second quarter of 2008 to nearly 7.5 million units (79.8% of total sales of HDTV).

The LCD screen on an LCD HDTV is a selective light filters. It is not in itself emit light, but selectively filter lightthrough the display from behind. Most HDTVs have either offer a single sheet of luminescent plastic or side lighting with fluorescent lamps for the backlight. Both techniques are difficult to control.

Many consumers focus on the screen resolution when selecting a High Def (HDTV) system. Is the HDTV 720p, 1020i or 1020P? However, when a group of experts, the SMPTE (Society of Motion Pictures and Television Engineers), recently on the importance of the screenResolution, so the fourth rank. The SMPTE Rank contrast ratio, color saturation, color temperature and grayscale before the screen resolution in importance. The Imaging Science Foundation to a similar conclusion. Backlight is the key component for improving the contrast ratio and grayscale.

It is important that an LCD system allows for adjusting the height of the backlight, and preferably, this function automatically. This improves the contrast of the image. Areduced brightness of the backlighting reduces power consumption and extend the life of the lamp, as the power used and the lamp life is directly related to the brightness of the backlight in context. A lamp with 50,000 hours life at 6 mA may be a 30,000 hour lifetime, if the current 7 mA, only 1 milliamp higher (example: Sharp Electronics LCD) display.

Another important factor in the choice of the backlight is the light of the "fuzziness". Blur occurs when there is rapid movement into the programming,such as sport. If the picture changes rapidly, the pixels can lay in the reaction. Effective backlighting engineering can be a significant reduction of strobe the backlight, so the individual pixels will be no longer than necessary on. Examples of this technology are Philips' Aptura "and the Samsung" LED Motion Plus. "

Sidelight

With side lighting, the lighting on the back of the LCD panel is located, and create buttons on each side lighting. ToLight more uniform, a light diffuser between the lights and the rear of the optical filter module is located. Most LCD systems with fixed light use cold cathode fluorescent tubes (CCF) lamps. This technology offers a very bright white light. The lifetime of the lamps) is usually between 10,000 to 20,000 hours (6-12 years at a rate of 5 hours use per day.

The main disadvantage is that the intensity of the light will not vary locally, and side-light can not look uniform. SomeCCF lamps contain mercury. This is an ecological disadvantage.

The main disadvantages:

The intensity of light can not be varied locally. This leads to a lower contrast image.
The light is not uniform.
Some CCF lamps contain mercury.

Conventional backlight

Most of the backlight is performed with a single sheet of electroluminescent plastic. These plates can age (although improvements have reduced this problem in this area). Electroluminescent backlight panelused to produce colored light phosphor. Shows using this technique can be thin and light and provide uniform light distribution.

The main disadvantages:

Limited life span from 3000 to 5000 hours to half brightness (2-3 years) at a rate of 5 hours use per day.
The intensity of light can not be varied locally.

LED backlight

LED-backlit display uses an array of LEDs can be controlled individually to provide a very good control. In this configuration, a largeNumber of LEDs are mounted uniformly behind the display. Improvements in LED brightness, they have more practical for backlighting. NEC pioneered this technique with the monitor, which 2180WG. Other companies such as Samsung, have recently versions of this technology. This should push prices down (the Samsung model costs less than 1 / 3 the price of a comparable NEC monitor).

This system offers local dimming technology and a dynamic contrast ratio of 1,000,000:1 reach. Trueactual black levels (the "Holy Grail" of the LCD) will be reached by turning off a pixel source. This can eliminate the typical gray-black screen for many LCD HDTVs. Groups of LEDs can be controlled locally, so that produce more light, making the brightness when necessary.

The problem with conventional white LEDs is that their spectrum is not ideal for photographic reproduction, because they are basically blue LEDs with yellow phosphorus at the top are. Their spectrum has two peaks on aA blue and another in yellow. White LEDs, which are based on a group of red, green and blue LEDs based on the RGB color filters, an LCD is ideal and can result in the saturated colors. Sony's "Tri-color LED backlight system is an example of this technique.
Sometimes, these HDTVs have a number of LEDs on the top and bottom of the screen. This improves the brightness and color reproduction and enables an almost complete uniformity across the display.

LED-backlit display are muchefficient that alternative techniques. And since the LED-backlit waste less energy, generate less heat, which must be managed with air conditioning. LED-backlit display offers a long life of more than 50,000 hours (more than 25 years) use a rate of 5 hours per day.

LED backlighting systems can not show well in a typical retail environment. In general, the screens are somewhat reflective in order to achieve the high contrast ratio, and then a brightly lit showroom maynot flatter this technology. In a typical less-lit environment, this problem should not be so noticeable.

Engineering concerns

The electronics is simpler, with LED backlighting. Cold-cathode fluorescent (CCF) requires a high AC voltages (1500 VAC) at startup and operating voltages of 700 VAC or more. When the lamp is new so they can run a lot less tension, but generally increase with age, the voltage requirements, a designer complicates the problem. ALight box requires a voltage of 100 VAC @ 400 Hz.

Generate an inverter (to VAC) for both CCF and electroluminescent panels required to operate with a DC power supply. This is a significant effort, cost, size and weight of the system. The best converter for this application allows the output voltage to the lamps automatically increase as the age, prolonging the life of the lamps.

LCD with LED backlight systems use low voltage DC, usually 12or 24 VDC. This results in a smaller, simpler and more reliable system. LED backlight systems must be well chilled or their performance may suffer. The LEDs generate less heat than CCF lamps, but the heat is very concentrated. Operation at high temperatures reduces the LED lifetime and shifts its spectrum of light, while reducing output luminance.

OLED

A new technology that you will hear is about the future of organic light emitting diode (OLED). This technology has a completely differentBacklight technology, he does not need this book. For this reason, they draw much less power. And because it's no backlight, an OLED system has a larger angle than an LED system. An OLED display is much thinner than an LCD display. The response time for OLED is faster than normal LCD screens. An average of 8 to 12 millisecond response time is normal for an LCD, compared with 0.01 millisecond response time for OLED.

Sony introduced a 11 "HDTV at the ConsumerElectronics Show in Las Vegas. The new 11 "Sony TV is called the" XEL-1 ". It is very thin (1 / 10") and currently sells for $ 2500 Samsung showed a 31 "OLED HDTV with 1080p resolution at a trade show in Asia in November. LG, Toshiba, Matsushita (Panasonic), and others are investing hundreds of millions of dollars to develop this extremely promising technology. Toshiba has plans to sale of 30-inch OLED display in 2009. Samsung has announced that they sell large OLED screen in HDTV2010th

OLED displays are used for some time in digital cameras, mobile phones and other devices with relatively small panels, because they are very energy efficient, which is very important in portable devices.

In theory, OLED displays can be produced more favorable than LCD or plasma displays, which means that it should not be so expensive. Note that the first large LCD and plasma displays were much more expensive than they firstintroduced.

Abstract

LCD HD televisions and monitors with LED-array backlight are now the concept of choice because they have a better image quality, while saving and electricity. The ability to locally control light power is the key to high contrast ratio.

Thinking LCD? Think Phillips 37 LCD HDTV

If you think, think of innovation in electronics, many people immediately, Phillips and the Phillips 37 LCD HDTV. They offer a range of TV sets, from the old-fashioned CRT sets, all the way through to the latest LCD and plasma screens. If you decide on a Phillips 37 LCD HDTV, it is a model available to fit your needs.

37PF7320A/37B The Philips 37-inch HD-Ready Flat-Panel LCD TV is an excellent HD-capable set. It iswith a clear 37-inch display that is the best available. It is extremely lightweight, weighing in at only 78 pounds. A CRT TVs would easily weigh 3 to 4 times more. It comes with a fantastic contrast ratio of 800:1 and an excellent rating of 550 cd/m2 brightness. It also has an 8-millisecond response time, which is excellent if you're watching fast-moving television like sports or an action movie. It also has a resolution of 1366×768, which provides for asharp, clear picture.

The tuner that comes with the set has been programmed for 181 channels, which is a big plus, since it only a matter of time before we realize that many cable channels. Many of the satellite providers have been far more than that, but they come with their own set-top box. The kit also comes with a CableCARD slot that can receive TV HDTV immediately without additional configuration. They would the cable card from your local cable –Company.

Philips is one of the largest electronics companies in the world and an industry leader in inventing new products. The company dates back to 1891 when it was founded by Gerald Philips in the Netherlands. They were one of the first companies to mass production of light bulbs in the world. They went on to be the best-known companies for VHS tapes. They are also a computer-chip manufacturers.

If you are at a very high-end buy set to come with the knowledgehighest quality of customer service, you would do well to choose a Phillips 37 LCD HDTV.